MASHZAVOD
Опубліковано 04 лютого 2015 року о 08:09

MASHZAVOD

 

1. Complete name of the enterprise/company

         Restricted liability society “MASHZAVOD”

 

      2. Name, surname and position of the managing director of the     enter

          prise/company

          Viktor Sidlyar - General Director

3. Contact data of the enterprise/company and of the person authorized to    work with foreign partners (postal address, e-mail, telephone/fax)

 

          Address: 16 Prutska str., Chernivtsi, 58000, Ukraine

          Fax:+38-0372-553919

          E-mail:info@mashzavod.com

          Web-site: www.mashzavod.com

 

          Koltunovych Anatoliy - Сhief of Integral Marketing and Foreign Business       Ser     vice)

          tel./fax +38-0372-594170

          E-mail: koltunovich@mashzavod.com

 

          Klymchuk Alla - Head of Foreign Business Relations department

          tel./fax +38-0372-594350

          E-mail: а.klimchuk@mashzavod.com

4. Enterprise/company profile

          Mashzavod Ltrd manufactures steel welded vessels and apparatuses, working        under pressure up to 15.2 Mpa (160 kgf/cm2) under loading and in vacuum with       diameter up to 4000 mm made of carbon, low-alloyed, high-alloyed, heat-  resist  ing steel, bimetal         for processing, refining and petrochemical enterprises, gas-    and oil transmission           pipe-lines (systems), for gas and oil-field development,   LPG terminals, for chemical industry and fertilizers production and other non-  typical custom-made equipment.

         

          LIST OF EQUIPMENT

          See Appendix No.1

 

          Harmonized commodity discription and coding system

          See Appendix No.2

 

          Mashzavod Ltd has in its possession the following certificates:

-      Certificate for Quality Control System in accordance with UkrSEPRO Certification System;

-      Certificate for Quality Control System in accordance with international standards  BS EN  ISO 9001:2008, issued by Bureau Veritas.

-      Certificate of Quality System Approval CE-PED-H1-MZD 001-05-UKR-rev.B (manufacturing of equipment in accordance with requirements of European Directive PED 97/23/EC with putting the stamp CE);

-      Certificate issued by American Society of Mechanical Engineers (ASME) -“U”and “U2” Stamps - pressure vessels.

5.  If the enterprise/company already exports to foreign markets? Which         products/services?

 

            Countries of CIS and Europe  

            (list of products – see Appendix No. 1)

 6. What regions (countries) are of particular interest for your enterprise/        company regarding exports operations? Which products/ services your      enterprise/company is ready to export?

 

           Countries of Africa, Asia and Middle East

          (list of products – see Appendix No. 1)

 7. What infrastructure or investment projects, tenders abroad are of particular          interest for the enterprise/company regarding your participation?

 

          The enterprise is interested in participation in tenders, conducted by state and private companies that work in oil and gas, chemical and energy         branches of industry. 

 

 

 

 

 

Appendix No.1

 

LIST OF EQUIPMENT

Mashzavod Ltd

 

1. HEAT-EXCHANGING APPARATUSES :

¾Shell-and-Tube type with increased heat efficiency, with diameters 159÷1400mm, of TП, ТУ, ХП, КП types;

 ¾ shell-and-tube type heat-exchangers with fixed tube plate and shell-and-tube type heat-exchangers with on-shell temperature compensator;

¾ shell-and-tube type heat-exchangers, tube bundles to them and “tube-in-tube” type  heat-exchangers;

¾“gas-gas” type heat-exchangers for cooling and differential condensation of natural gas;

¾ heat exchangers with diameter 800 mm for heating of natural gas;

¾shell-and-tube rod type heat-exchangers with longitudinal baffle plate;

¾“tube-in-tube” type heat-exchangers, single-flow and multiflow. Construction parts and principal dimensions .

 

2.  EVAPORATORS :

¾steam volume types ИП, ИУ, with diameters 800, 1000, 1200, 1400, 1600,1800, 2000 mm

¾thermosyphon evaporators.

 

3.CONDENSERS :

¾vacuum

4.EVAPORATORS AND CONDENSERS :

¾ cooling.

5. TUBE BUNDLES (spare parts) for the equipment, specified in items 1-4 and under specific projects.

6. OIL COOLERS for cooling oil, circulating in power transformer oil systems

7.HEATERS:

¾ water-steam and water-moderated for heating systems;

¾ capacitive horizontal water-steam evaporators.

8. SEPARATORS :

¾ grid-type gas separators (ГС) with diameters 600, 800, 1200, 1600, 2000 mm designed to purify natural gas from impurities;

¾ oil and gas separators;

¾ input separators for high pressure up to 15.2 Mpa.

9. DUST SEPARATORS for cleaning natural gas from mechanical impurities and liquids with diameter 1200, 2000 mm.

10. FILTERS:

 – mud collectors ДУ 700 Pу 40 as per ГПУ 182.00.000 ВО, Ду 500 Ру 40 and with other diameters;

filters of СДЖ type.

 

11.COLUMN APPARATUSES applied for rectification, absorption, adsorption, desorption, cooling and purifying, with diameters from 400÷4000 mm in assembly; with diameters more than 4000 mm - in parts, with different types of contact devices (trays):

¾ straight way valve trays;

¾ valve ballast trays;

¾ sieve ;

¾ S-shaped valve trays;

¾ valve trapezoidal trays;

¾ nozzle-type trays, irregular (Rushig rings) ;

¾ sieve with baffle elements;

¾ grid-type  trays ;

¾ bubble trays;

¾ sieve-valve trays.

12. SCRUBBERS air scrubbers with diameter 1200÷2600 mm and nitrogen scrubbers with diameter 1400÷3200 mm.

13. MODULE-UNIT-CONSTRUCTION equipment, designed for various purposes in oil-and-gas industry:

¾ units, applied for purifying, measuring, drying and storage of impulse gas, gas heating  units  ;

¾ dust separator units for pressure 5,5 МPa and 7,5MPа;

¾ filter-separator units;

¾ glycol regeneration units with productivity  Q= 0,5 ÷ 30  m3/h ;

¾ heat-carrying agent heating units with productivity Q= 25 m3 /h ; 600,0 m3/h;

¾ gas  heating units Q= 10 000, 30 000 m3/h ;

¾ gas low-temperature separation units as per;

¾ glycol purifying unit;

¾ process modules for automobile gas-filling stations V= 10 m3.

14. CAPACITIVE CYLINDRICAL APPARATUSES:

¾ horizontal and vertical vessels with volume up to 200m with operating pressure  up to 2,5 MPa for gaseous and liquid environment;

¾ butane storage tanks БС 50÷200 and propane storage tanks ПС-10÷200;

¾ air receivers;

¾ underground drainage tanks;

¾ liquid separators with volume up to 63 m3  ;

¾ electric dehydrators and thermo dehydrators for dehydration and desalination of petroleum and gas condensate;

¾ steel horizontal cylindrical above-ground and underground flat-bottom storage tanks with volume of 3¸100 m3, applied for petroleum product storage loading;

¾ tanks V=10m3 for automobile gas-filling stations;

¾ capacitive steel horizontal cylindrical apparatuses per ГЭЭ type (for chemical environment) and ВЭЭ type (for corrosion protection)

15. AIR COOLING APPARATUSES AND SECTIONS TO THEM:

¾ horizontal type 1АВГ;

 ¾ horizontal type 2АВГ;

¾ low-flow horizontal and vertical (ABM);

¾ zigzag type АВЗ;

¾ horizontal type АВГ;

¾ zigzag type, horizontal and low-flow.

16. CRYOGENIC ENGINEERING PRODUCTS.

17. VESSELS AND APPARATUSES FOR LOW-TEMPERATURE GAS SEPARATION

18. AUTOMATED TANKER DISCHARGE-REFILL SYSTEMS (ACH) applied for equipping stationary wharves of coastal oil bases, designed for discharging and refilling oil and petroleum products, as well as for loading ballast water and removing air-steam mixture.

The ACH includes:

¾ loading arms AC-250 and AC-400 (diameter of product pipe - 250 mm and 400 mm)

¾ oil pressure station CM-100-45;

¾ remote control ПУН-100-6;

¾ piping manifold.

 

19. MANIFOLD AND FIELD PIPELINE CONNECTORS with Ppup to 10 Mpa:  

 

¾ Bends with diameter 57÷1420 mm with turning angle 30°, 45°, 60°, 90 °;

¾ Bends with diameter 57÷1420 mm with turning angle from 3° to 90° Pp £ 7.5 Mpa;

¾ Tees with diameter 530÷1420 mm;

¾ Tees with diameter 57÷426 mm;

¾ Tees with diameter 720´325, 377, 426, 530, 630 mm; 1020´325, 377, 426, 530, 630, 720, 820 mm;

¾  Reducing pipes with diameter 530´426 ÷1420 ´ 1220 mm;

¾  Reducing pipes with diameter 57´32÷426´377 mm;

¾  Heads with diameter 57÷1420 mm;

¾     Manholes Ду500 mm, Pу 7.5 Mpa  for tube with diameter 720, 1020 mm.

 

MANIFOLD AND FIELD PIPELINE CONNECTORS with Pp   up to 9,8 Mpa (100kgs/cm2):  

¾ Bends with diameter DN 400-1400 mm with turning angle 30°, 45°, 60°, 90 °;

¾ Tees with diameter DN 500-1400 mm;

¾ Tees with diameter DN 200-400 mm;

¾  Reducing pipes DN 500 ´ dN 400 - DN1400 ´ dN1220 mm;

¾  Heads with diameter DN 200 -1400 mm;

¾  Adapter rings with diameter DN 400 - 1400 mm.

 

MANIFOLD AND FIELD PIPELINE CONNECTORS with Pp   up to 14,0 Mpa:  

¾ Bends with diameter DN 50-1200 mm with turning angle 30°, 45°, 60°, 90 °;

¾ Tees with diameter DN 500-1200 mm;

¾  Reducing pipes DN 500 ´ dN 400 – DN 1200 x dN 1000 mm;

¾  Heads with diameter DN 50 -1200 mm;

¾  Adapter rings with diameter DN 400-1200 mm.

 

20. GAS HEATERS TYPE ПГ-10, ПГ-30.

21. PIPING FLOW-LINE MEANS START-UP AND RECEPTION SYSTEMS with diameter 500, 700 mm.

22. BOILER-AUXILIARY EQUIPMENT:       

¾ deaerating plants;

¾ separators of continuous and discontinuous boiler purge;

¾ water preparation filters;

¾ vapour condenser  OB 2÷24;

 

23. SHELF EVAPORATOR for separation solvents from sunflower seed extraction residues (fat-and-oil industry)

24. AUTOCLAVES for triplex glass heat treatment, diameter 2000 mm with operating medium temperature up to 140 0 C.

25. DEGASATORS liquid with volume 2÷100 m3; with pressure 0.3; 1.6; 4.0; 6.3 Mpa .

26. REACTOR EQUIPMENT with diameter 800÷4000mm, pressure up to 16,0 МPа:

¾ vertical reforming apparatuses;

¾ hydrotreating reactors with fixed catalyst layer.

 

27. OTHER EQUIPMENT AS PER SPECIFIC PROJECTS AND DIFFERENT TYPES OF WELDED METAL STRUCTURES.

 

 

                                                                      

Appendix No.2

 

No

PRODUCTION

CODE

HCDCS

1

COLUMN APPARATUSES

 

8419400000

2

HEAT-EXCHANGING APPARATUSES

 

8419509000

3

“TUBE-IN-TUBE” TYPE HEAT EXCHANGERS

 

8419509000

 

4

TUBE BUNDLES OF HEAT EXCHANGERS

 

8419908000

 

5

EVAPORATORS

 

8419509000

 

6

CONDENSERS VACUUM

 

8419509000

7

EVAPORATORS AND CONDENSERS COOLING

 

8419509000

 

8

REACTORS

 

8419899800

9

Units, applied for purifying, measuring, drying and storage of impulse gas, gas heating  units

 

8419509000

 

10

FILTERS

 

8421299000

 

11

Gas separators (grid-type) to purify natural gas

 

8421399800

 

12

DUST SEPARATORS for cleaning natural gas

 

8421399800

 

13

Oil and gas separators

 

8421399800

 

14

Input separators

 

8421399800

 

15

SCRUBBERS air and nitrogen

 

8421399800

16

Air receivers

 

7309001000

17

Horizontal and vertical vessels with volume up to 200m 

 

7309005100

18

Butane and propane storage tanks

 

7311009900

19

Underground drainage tanks

Liquid separators

Storage tanks

7309005900

Outdated Browser
Для комфортної роботи в Мережі потрібен сучасний браузер. Тут можна знайти останні версії.
Outdated Browser
Цей сайт призначений для комп'ютерів, але
ви можете вільно користуватися ним.
67.15%
людей використовує
цей браузер
Google Chrome
Доступно для
  • Windows
  • Mac OS
  • Linux
9.6%
людей використовує
цей браузер
Mozilla Firefox
Доступно для
  • Windows
  • Mac OS
  • Linux
4.5%
людей використовує
цей браузер
Microsoft Edge
Доступно для
  • Windows
  • Mac OS
3.15%
людей використовує
цей браузер
Доступно для
  • Windows
  • Mac OS
  • Linux